These pre-made Super Juggernaut Coils differ from the standard juggernaut coil in one main way. Rather than utilising two parallel clapton coils as it’s core, the super juggernaught uses one clapton and one smaller standard wire. This smaller wire heats up quicker than the larger clapton, cutting down the ramp up time of the coil considerably. The two wires are parallel to each other and then wrapped by a flat ribbon wire.
Our super juggernaut coils consist of a clapton wire with a 26 gauge kathal A1 core and a 32 gauge kanthal A1 wrap. This is sat parallel to 24 gauge kanthal wire and the two wires are then wrapped by a 0.1mm x 0.9mm flat ribbon wire. The wire is then coiled at 0.3 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.