These pre-made Juggernaut Coils consist of two parallel clapton wires which are made by wrapping a length of smaller gauge wire around a larger gauge wire core. These two lengths of clapton wires are laid parallel to each other providing a core for a flat ribbon wire to be wrapped around them.
Our juggernaut coils consist of two parallel clapton wires with a 28 gauge kanthal A1 core and a 32 gauge kanthal A1 wrap. The two wires are then wrapped by a 0.1mm x 0.5mm flat ribbon wire. The resulting wire is then coiled at 0.45 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.