The standard staggered coil consists of two clapton wires with spaced out wraps running parallel and then the two are wrapped by a smaller wire staggered between the previous wraps to give the appearance of a weave pattern.
Our staggered coils bear a resemblance to a flattened fused clapton coil and consist of 24 gauge kanthal A1 core wires with 32 gauge kanthal A1 as the wrapping wire. This is then coiled at 0.3 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.