DIY E-Liquid Mixing Kit (12mg)

If you would like to mix your own e-liquid, this DIY E Liquid Mixing Kit (12mg) has everything you need to make 120ml at a strength of 12mg.

The kit contains all the individual ingredients required including eight 18mg nicotine shots, propylene glycol, vegetable glycerine, two Vapable flavour concentrates, four 30ml Unicorn bottles and all the accessories you will need.

Contents

• 8 x 10ml bottles of 18mg 100% VG Nicotine Shots
• 100ml propylene glycol
• 100ml vegetable glycerine
• 2 x 10ml of any of our flavour concentrates
• 4 x empty 30ml unicorn bottles with long thin spout
• 1 x 10ml syringe
• 1 x 1ml syringe
• 2 x 14g long dispensing needles
• Pair of nitrile, chemical resistant gloves

Other DIY E Liquid essentials can be found here.

Mixing Guide

Step 1. – Flavouring

A good starting percentage for our Vapable concentrates is 15%. In a 30ml bottle this equates to 4.5ml of flavouring per 30ml mix. This can be adjusted according to taste.

All our concentrates are Propylene Glycol based, so the percentage of flavouring will make up part of the overall PG percentage.

Step 2. – Nicotine

The nicotine solution provided is 18mg and needs to be diluted to achieve the desired 12mg strength. This means the overall percentage of nicotine required in the mix will be 66.7% or two thirds. In a 30ml bottle this equates to 20ml of Nicotine Shot.

The base liquid for the nicotine shot is 100% VG.

Step 3. – PG/VG

Add 5.5ml of PG, place the spout and lid onto your bottle, shake until all the ingredients are thoroughly mixed and its ready to vape.

Want to forge your own recipes instead? Our DIY E-Liquid Calculator is the tool you need in your corner!