These pre-made Hive Coils are made by taking 2 lengths of wire and twisting them together to form a length of twisted wire. This process is then repeated with another 2 lengths of wire. The resulting 2 lengths of twisted wire are themselves twisted together to form a 4 wire twist.
Each individual length of wire is 30 gauge kanthal and the overall resistance of the coil is 0.5 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.