These Pre-made Hero Alliance Coils consist of two different wires twisted together. The first is a standard clapton wire. The second is a length of wire which is wrapped by a length of flat ribbon wire. The two types are then twisted together to make the hero alliance.
Pack of 10 in two varieties.
Other Coil making essentials can be found here.
- Clapton wire with a 28 gauge kanthal A1 core and 32 gauge kanthal A1 wrap and 26 gauge kanthal A1 wire with a 0.2mm x 0.8mm flat wire wrap, twisted together and coiled at 0.36 ohms.
- Clapton wire with a 28 gauge kanthal A1 core and 32 gauge kanthal A1 wrap and 26 gauge kanthal A1 wire with a 0.1mm x 0.9mm flat wire wrap, twisted together and coiled at 0.55 ohms.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.