If you would like to mix your own e-liquid, this DIY E Liquid Mixing Kit (3mg) has everything you need to make 120ml at a strength of 3mg.
The kit contains all the individual ingredients required including two 18mg nicotine shots, propylene glycol, vegetable glycerine, two Vapable flavour concentrates, four 30ml Unicorn bottles and all the accessories you will need.
Contents
- 2 x 10ml bottles of 18mg 100% VG Nicotine Shots
- 100ml propylene glycol
- 100ml vegetable glycerine
- 2 x 10ml of any of our flavour concentrates
- 4 x empty 30ml unicorn bottles with long thin spout
- 1 x 10ml syringe
- 1 x 1ml syringe
- 2 x 14g long dispensing needles
- Pair of nitrile, chemical resistant gloves
Mixing Guide
Step 1. – Flavouring
A good starting percentage for our Vapable concentrates is 15%. In a 30ml bottle this equates to 4.5ml of flavouring per 30ml mix. This can be adjusted according to taste.
All our concentrates are Propylene Glycol based, so the percentage of flavouring will make up part of the overall PG percentage.
Step 2. – Nicotine
The nicotine solution provided is 18mg and needs to be diluted to achieve the desired 3mg strength. This means the overall percentage of nicotine required in the mix will be 16.7% or one sixth. In a 30ml bottle this equates to 5ml of Nicotine Shot.
The base liquid for the nicotine shot is 100% VG.
Step 3. – PG/VG
Add 13ml of VG & 7.5ml of PG, place the spout and lid onto your bottle, shake until all the ingredients are thoroughly mixed and its ready to vape.
Want to forge your own recipes instead? Our DIY E-Liquid Calculator is the tool you need in your corner!
davies.lewis –
Unfortunately I didn’t get this kit, and ordered all of the parts separately instead. I’m very impressed with the quality from vapable, most notably the VG. It’s some of the clearest and goopiest I’ve had. The syringes are a little bit of a pain, I found that after a few washes the markings rub off so to anybody who orders this kit and enjoys making their own juice from it I recommend just buying a box of 1ml disposable syringes.
As for the guy who was wondering if you could make 12mg NIC 70/30 VG/PG with this kit then I am afraid the answer is no, but the kit is not to blame. Because of the TPD nicotine cannot be sold in concentrations higher than 20mg/ml, and since this kit contains 50/50 VG/PG then it simply cannot be diluted enough. To make 12mg you would need nicotine diluted in 100% VG, and for this I recommend Vapable’s own 20mg NicSalt. The extra 2mg seems small but when diluting it helps a lot.
My one recommendation for improving this kit would be to include a couple of rubber syringe stoppers for the base liquid bottles, but other than this it looks perfect!
Chris –
Hi,
I bought this kit to make 3mg liquid and it been great the best thing I’ve purchased in a long time, saves me so much money on liquid and I prefer fresh made juice, i now want to make some for my girlfriend however she uses 12mg could you tell me the ingredients for a 12mg juice at a ratio of 70/30 please?
Jo –
Thought I would give it a go at making my own,very ease with the little mixing guide.
Also Mike was extremly helpful when I called him for help. He also offered to send a free bottle of raspberry & lemon concentrate.
mucyman –
First time at having a go at diy e-liquids and so bought the small kit, enough to make 120 ml+ with the Caramel Rich and the Jam On Toast – made 30ml of each and tried the Caramel Rich after just an hours steep and am impressed!
Also thanks to the reviewer who put up the 70/30 ratio recipe – perfect result so far. I will obviously let ’em steep for weeks/months and will see the difference. Thanks Vapable…and you guys ?
djprism2009 –
sorry was meant to read 1.5ml to make 4.5ml of flavour!!
djprism2009 –
hi
I have just received my starter kit
i have followed the recipe for 70/30 vg/pg 3 ml nic and have made my batch
i have used bubblegum 3ml with 15ml blueberry
my question is do i need to steep the juice and what is the recommended time?
many thanks for promp delivery
heres hoping it will come out ok
Kevin Vasconcelos –
Can I make 70vg and 30pg with this kit??
Can you give me the receipee to make please
Mike –
Of Course
For a 70/30 VG/PG with 15% flavouring in a 30ml, you would need 5ml – 50/50 nic shot, 4.5ml – Flavouring, 2ml – PG and 18.5ml – VG.
If you add more flavouring, you just need to take it off the extra PG.
Jim Bailey –
Delivered in under 48 hrs. Lovely kit. The vape is lovely and smooth. Blackcurrant is spot on and ive got choc malt brewing. Hesitant about it all? Just find an onlone calculator. This has everything else you need. Ill be back for more.