These pre-made Vulcan Coils are a very large and complicated mix of flat and standard wire. It comprises of flat ribbon wire which is then wrapped in a thinner wire. Two larger wires are laid either side and then the whole thing is wrapped in flat wire.
It is a very large coil and will need large post holes to accommodate it.
Our vulcan coil consists of a length of 0.3mm x 0.8mm flat wire wrapped with 32 gauge kanthal A1. Two lengths of 26 gauge kanthal A1 are laid either side and then the whole thing is wrapped by 0.1mm x 0.5mm flat wire. This is then coiled at 0.2 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.
Latest Reviews for Vulcan Coils 0.2ohm Pre-Made (Kanthal A1 Pack of 10)
No Reviews yet - why not be the first