These Pre-made Staple Staggered Coils consists of a flat wire core which is the wrapped in a thin standard wire. Two lengths of wire are then laid side by side and the whole thing is wrapped with spaced out turns, slightly resembling staples.
Our staple staggered coils are comprised of a core made up of length of 0.3mm x 0.8mm flat ribbon wire with a 32 gauge kanthal A1 wrap. Two lengths of 24 gauge kanthal A1 are laid either side and the whole thing is wrapped in 32 gauge kanthal. This is then coiled at 0.2 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.
Latest Reviews for Staple Staggered Coils 0.2ohm Pre-Made (Kanthal A1 Pack of 10)
No Reviews yet - why not be the first