These pre-made Giant Coils are made up of 3 lengths of wire twisted together. The first two are identical clapton wires and the third is a standard length of wire. the standard wire heats up quicker than the clapton wires, which significantly reduces the ramp up time of the twisted coil.
Our giant coils consist of two identical lengths of clapton wire with 26 gauge kanthal A1 wrapped with 35 gauge kanthal A1. The third wire is a length of standard 26 gauge kanthal A1. The three lengths of wire are twisted together to form a spiral and then coiled at 0.25 ohms.
Pack of 10
Other Coil making essentials can be found here.
These products are meant for advanced users only and caution is advised. Please ensure that your device and batteries can handle low ohm builds. Lower resistance coils such as these have a higher amp draw. Due to the manufacturing process, the actual resistance may vary slightly from the stated resistance. A device with an ohm meter is advisable, especially to ensure there are no short circuits due to incorrect installation.
Latest Reviews for Giant Coils 0.25ohm Pre-Made (Kanthal A1 Pack of 10)
No Reviews yet - why not be the first